Transformer radiator powder coating: a plant in Guangdong
A Guangdong manufacturer coating tall transformer radiators for new-energy transformer projects. Tall parts are a geometry problem: the same line has to coat a 2-metre panel evenly from top to bottom while keeping hanging density high enough to be economic.


The parts
Tall transformer radiator panels, up to roughly 2,000 mm, hung vertically, mixed with shorter panels in the same shift.
What the line had to solve
- Even film over a 2-metre height: a fixed gun position gives a heavy band at one height and a thin one elsewhere.
- Oven uniformity over a tall work zone – the top of a panel can cure faster than the bottom if air flow is not balanced.
- Hanging density: too much space between panels costs output, too little causes shadowing between adjacent parts.
- Unload handling of tall panels without touching freshly cured film.
How the line is built
- Reciprocating carriages with a stroke matched to the tallest panel, speed linked to conveyor speed so each point on the part sees the same number of passes.
- Oven with balanced supply and return air and adjustable nozzle positions, so the tall zone holds +/-5 C top to bottom.
- Hanger pitch set by panel width plus a shadow allowance, calculated rather than guessed.
- Cooling tunnel long enough for the film to harden before unload, with an offset unload station.
Acceptance and handover
Acceptance measured film at top, middle and bottom of a full-height panel, checked oven uniformity at the same three heights with a profile recorder, and ran a full shift at target hanging density to confirm cycle time. Adhesion class 0-1 and colour against a master sample.
Customer name withheld. Height and density figures can be released on request.
Related
Powder coating line · Powder coating booth · Curing oven · Pretreatment · Watch a radiator line running