PRODUCT
Magic Colour-Changing Powder Booth
A quick colour-change powder booth designed so the recovery system can be cleaned and switched to the next colour in minutes rather than hours.
Colour change time is the hidden cost of multi-colour powder production. In this booth the ducting, hopper and recovery parts are removable and cleanable without tools, and the booth interior has smooth, non-stick surfaces so compressed-air blow-down clears it quickly.
It suits job shops and appliance plants running several colours on one line, where a cartridge booth would otherwise mean a long stop between batches.
- Tool-free removable ducting and hopper
- Smooth interior for fast blow-down cleaning
- Cartridge or cyclone recovery
- Colour change in minutes, not hours
- Powder feed and sieve included

| Item | Typical specification |
|---|---|
| Recovery | cartridge or cyclone |
| Colour change | quick-change design |
| Panel | powder-coated steel or SS304 |
| Guns | 2 – 8 |
Not sure which configuration fits your parts?
Send us your workpiece size, coating type and required output per shift. We reply with a line proposal and a budget range within one working day.
Fast colour change without cleaning the booth
When a job shop runs several colours a day, the time lost cleaning a cyclone booth between colours becomes the bottleneck. A colour-changing booth keeps a separate recovery module for each colour, so a change means sliding one module out and another in.
- Colour change typically 3–8 minutes with one operator
- Separate hopper and recovery per colour — no cross-contamination
- Powder from the previous colour stays usable
- Works with manual guns or automatic reciprocators
The booth is sized from your largest part and the number of colours you actually run; a typical installation carries 4–8 modules. It is the standard choice for aluminium profiles, furniture and appliance parts where colour variety is high.