Product ranges
Buy a complete line, or buy one station to upgrade the line you already have. Every range is engineered to your workpiece size and output.

Powder Coating Line
Complete electrostatic powder coating lines: pretreatment, booth, curing oven, conveyor and controls.

Liquid Painting Line
Wet paint lines with spray booths, flash-off and baking oven for solvent or water-based coatings.

Powder Coating Booth
Cyclone, mono-cyclone, cartridge and colour-change booths with powder recovery and feeding.

Liquid Painting Booth
Water-curtain and dry-filter spray booths for solvent or water-based paint.

Pretreatment
Dipping and spraying pretreatment lines: degreasing, rinsing, phosphating and passivation.

Curing Oven & Dry-Off Oven
Tunnel and batch ovens for powder curing and paint baking, gas, diesel or electric.

Conveyor
Overhead chain and power-and-free conveyors carrying parts through pretreatment, coating and curing.

Reciprocator
Automatic gun reciprocators for even film thickness and lower powder consumption.
How our product range is organised
Coating equipment only works when the stations match each other, so we group the range the way a line is actually built: the two complete line families first, then the stations that go inside them, then the auxiliaries that keep the stations running.
- Powder coating line — pretreatment, booth, oven and conveyor for electrostatic powder
- Liquid painting line — wet paint, flash-off and curing for gloss and special effects
- Pretreatment — 3, 4 or 5 stage spray or dip
- Powder coating booth — cyclone, mono-cyclone, cartridge and colour-changing
- Liquid painting booth — water curtain, dry filter, downdraft
- Curing oven & dry-off oven — zoned tunnel with gas, diesel or electric heat
- Conveyor — overhead chain and power-and-free
- Reciprocator — one or two guns, pneumatic or servo
Parts and consumables — guns, venturi tubes, powder hoses, filters, sieves and hoppers — are quoted alongside the machines so a line is complete on arrival, not waiting for a missing nozzle.
Not sure which station you need?
Send a photo of the part with its size and the output you need per shift. We reply with the station list, a layout sketch and a price, usually within two working days. No drawing from you is required at this stage — a photo and three numbers are enough to start.
Buying guides before you request a price
Four short guides written from the numbers we use when sizing a line — useful whether you buy from us or not.
- What a powder coating line costs — the five cost blocks and the four numbers that set them
- Choosing a powder coating booth — cyclone, cartridge or colour change
- How many pretreatment stages you need — 3, 4 or 5, and why
- Powder coating vs liquid painting — film, colour range and running cost