PRODUCT
High Quality Powder Coating Line
A complete electrostatic powder coating line: multi-stage pretreatment, powder booth with recovery, curing oven, overhead conveyor and PLC control, engineered around your workpiece and output.
This is our standard configuration for a new powder coating plant: a three- to five-stage pretreatment, a cyclone or mono-cyclone powder booth with reciprocators, a tunnel curing oven sized to the line speed, and an overhead chain conveyor running at 1-3 m/min.
Because every station is sized from the same four inputs – largest workpiece, coating type, output per shift and floor space – the line runs without bottlenecks. If you only need a booth and oven to start with, we can supply that and add pretreatment later; the drawing leaves room for it.
- Pretreatment 3-5 stages, dipping or spraying type
- Powder booth with cyclone recovery and reciprocators
- Tunnel curing oven, 180-200 C, gas/diesel/electric
- Overhead chain conveyor, 1-3 m/min (6 m/min max)
- PLC control with recipe storage and alarms
- Trial run and video report before shipment



| Item | Typical specification |
|---|---|
| Output | typically 20-80 hangers/hour |
| Workpiece | custom, up to 1500 x 1000 x 800 mm |
| Line speed | 0.5 – 6 m/min |
| Curing | 180 – 200 C, 15 – 20 min |
| Heating | LPG / gas / diesel / electric |
| Warranty | 24 months |
Not sure which configuration fits your parts?
Send us your workpiece size, coating type and required output per shift. We reply with a line proposal and a budget range within one working day.
Best fit for this line
This configuration is chosen by buyers who run one or two colours on medium-to-large parts and want a line that can be upgraded later without rebuilding it:
- Metal furniture frames and shelving panels
- Electrical cabinets and enclosures
- Garden tools, fencing and gates
- Pump and valve bodies
What makes it different from an entry-level line
The conveyor is heavy-duty with a larger hanger load, the booth uses a full cyclone recovery instead of a simple filter, and the oven has a longer curing zone — so line speed stays stable when parts get heavier or the film gets thicker. Gun count, booth width and oven length are still sized to your part, not taken from a fixed catalogue size.
Questions buyers ask about this line
What output can one line give?
It depends on part area and conveyor speed. As a guide, at 2 m/min with 400 mm pitch, a single booth handles roughly 300–500 m² of coated surface per shift. Send your part and target output and we will calculate the gun count and booth length.
How much floor space is needed?
A straight line for parts up to 1.5 m long typically needs 18–28 m of length and 4–6 m of width, including the loading and unloading zones. If your hall is shorter, we design an L-shaped or return-loop layout instead.
Can we add a second colour later?
Yes. We leave space for a second booth and a colour-change zone in the layout, so a second colour can be added with a new booth and ducting rather than a new line.