Tunnel Curing Oven

PRODUCT

Tunnel Curing Oven

A conveyorised curing oven for powder coating, with length calculated from your line speed and required dwell time.

Request a quotation

Powder curing needs the metal to reach 180-200 C and hold for 10-20 minutes. Oven length is therefore line speed times dwell, plus entry and exit zones where heat is recovered instead of lost.

Panels are rock-wool insulated at 100-150 mm with a galvanised or stainless inner liner, and air is distributed through slots or nozzles so the spread across the load stays within 5 C – the difference between even gloss and patchy colour. Heating is gas, diesel or electric with PID control.

  • Length from line speed and dwell time
  • Rock wool panels 100-150 mm
  • Within 5 C across the load
  • Gas, diesel or electric with PID control
  • Heat recovery at entry and exit
  • Thermocouple recorder and over-temperature alarm
ItemTypical specification
Curing temperature180 – 200 C
Dwell10 – 20 min
Uniformitywithin 5 C
HeatingLPG / gas / diesel / electric

Not sure which configuration fits your parts?

Send us your workpiece size, coating type and required output per shift. We reply with a line proposal and a budget range within one working day.

Request a quotationChat on WhatsApp

Tunnel curing oven — continuous, zoned, controlled

A tunnel oven cures parts as they pass through on the conveyor. It is divided into heat-up, hold and cooling zones, each with its own burner and thermocouple, so light and heavy parts on the same line still reach the required metal temperature.

  • 180–200 °C for powder, lower for liquid paint
  • Zoned burners with independent temperature control
  • Rock-wool insulated panels with low outer skin temperature
  • Roof slot with heat curtain for the conveyor

Oven length follows your line speed and the dwell time your coating supplier specifies. We check temperature uniformity across the tunnel and log it in the trial-run report, and we supply the heat-load calculation with the drawings.

BestCoatingLine

Powder coating lines, liquid painting lines and turnkey coating solutions. Engineered with specialist partner plants in Guangdong, China.

WhatsApp / WeChat: +86 156 0291 6761

[email protected]

Registered office

Sales departmentRoom D327, No. 42 Caiyun Road,
Longcheng Street, Longgang District,
Shenzhen, Guangdong, China

CompanyBEST MACHINES & EQUIPMENTS CO., LTD.

Production base

Project officeNo. 6-1, Dongsheng Road, Dongsheng Village,
Minzhong Town, Zhongshan,
Guangdong, China

Assembly base

Machining & assemblyChashan, Dongguan,
Guangdong, China

Working hoursMon-Sat, 08:30-18:00 (GMT+8)

© 2016-2026 BEST MACHINES & EQUIPMENTS CO., LTD. All rights reserved. Coating line solutions since 2016
Scroll to Top