Choosing a Powder Coating Booth: Cyclone, Cartridge or Colour Change

Choosing a powder coating booth

Every powder booth contains the powder cloud and recovers overspray. What separates them is how the overspray is recovered, and that decides three things you live with every day: running cost, colour-change time, and how much floor space the booth takes.

The four types, and who they suit

Cyclone recovery

Overspray passes a cyclone that returns usable powder to the feed hopper, then a secondary filter cleans the exhaust. Recovery rates are high, so powder cost per square metre is low. Cleaning for a colour change takes 20–40 minutes with two operators. Best for one or two colours on continuous production.

Mono-cyclone

Cyclone and filter in one compact body, so it fits where a full cyclone plus ducting would not. Recovery is slightly lower than a full cyclone and the unit suits small-to-medium lines running one or two colours with limited floor space.

Cartridge filter

No cyclone: powder collects on cartridges and is either discarded or reclaimed. Colour changes are quick because there is less internal surface to clean, which makes it the usual choice for job shops with many short runs. Consumables (cartridges) become a line item in running cost.

Colour-changing booth

Each colour keeps its own recovery module. A change is a module swap rather than a deep clean, typically 3–8 minutes, and powder from the previous colour stays usable. Capital cost is higher, and the design only pays off when colour variety is genuinely high — four or more colours a day.

The numbers that size the booth

  • Part envelope — width plus clearance decides booth width; height decides booth height and gun positions
  • Airflow — must stay above the minimum face velocity at full conveyor speed, otherwise powder escapes at the openings
  • Gun count — two guns per side for panels; four or more for large parts or high output
  • Recovery capacity — filter area or cyclone diameter sized for the powder you actually spray per hour

How to compare two booth quotations

  1. Compare booth internal dimensions against your largest part, not against the model name
  2. Ask for the airflow calculation in m³/h and the fan motor power
  3. Ask for the recovery rate as a percentage, and what happens to recovered powder
  4. Ask for the colour-change time with a stated number of operators
  5. Ask whether the booth is built to your local fire code, and what documents are supplied

Frequently asked questions

Can I use one booth for primer and top coat?

Yes with powder, but not with the same recovery if the two powders are different chemistries — mixed reclaim gives unpredictable finishes. Use separate hoppers and clean between jobs, or a two-booth layout.

How much powder does a cyclone actually save?

On a well-run cyclone booth, reclaim can return a large share of overspray to the hopper, which is why powder consumption per square metre drops noticeably compared with a filter-only booth. The saving depends on how much overspray you generate, which depends on gun settings and operator technique.

Does booth size affect curing?

Indirectly. A larger booth with the same airflow has a lower face velocity, so more powder escapes and the film can vary. The oven then has to cure an uneven film. Sizing the booth and airflow together avoids that.

Related

Powder coating booths · Colour-changing booth · Mono-cyclone booth · What a line costs

Tell us your part size and colours

BestCoatingLine

Powder coating lines, liquid painting lines and turnkey coating solutions. Engineered with specialist partner plants in Guangdong, China.

WhatsApp / WeChat: +86 156 0291 6761

[email protected]

Registered office

Sales departmentRoom D327, No. 42 Caiyun Road,
Longcheng Street, Longgang District,
Shenzhen, Guangdong, China

CompanyBEST MACHINES & EQUIPMENTS CO., LTD.

Production base

Project officeNo. 6-1, Dongsheng Road, Dongsheng Village,
Minzhong Town, Zhongshan,
Guangdong, China

Assembly base

Machining & assemblyChashan, Dongguan,
Guangdong, China

Working hoursMon-Sat, 08:30-18:00 (GMT+8)

© 2016-2026 BEST MACHINES & EQUIPMENTS CO., LTD. All rights reserved. Coating line solutions since 2016
Scroll to Top