Liquid Painting Line

PRODUCT LINE

Liquid Painting Lines for Solvent and Water-Based Coatings

Liquid painting still wins wherever you need primer plus topcoat, metallic effects, or thick high-build films. We build complete wet lines: spray booth, flash-off, baking oven, conveyor and controls.

Get a quotation

The core of every liquid line is the spray booth. We supply water-curtain booths for solvent-based paint and dry-filter booths for water-based paint, in downdraft or crossdraft layout, with explosion-proof motors and lighting where the solvent load requires it.

Between booth and oven there must be a flash-off zone long enough for solvent to evaporate at line speed, otherwise the film pops in the oven. We calculate that length from your paint supplier’s data sheet, not from a fixed template.

Baking ovens are typically 140-160 C for 20-30 minutes, with PID control and even air distribution so part temperature varies less than 5 C across the oven width.

Liquid Painting Line

What is included

  • Water-curtain or dry-filter booth, downdraft or crossdraft
  • Explosion-proof fan, motor and lighting for solvent paint
  • Flash-off zone sized from real solvent evaporation data
  • Baking oven 140-160 C with PID control
  • Manual, automatic or reciprocator gun mounting
  • Overhead chain or power-and-free conveyor

Typical specifications

ItemTypical specification
Line speed0.5 – 4 m/min, variable
Booth typewater curtain (solvent) / dry filter (water-based)
Baking140 – 160 C, 20 – 30 min
Coatingprimer, topcoat, metallic, high-build
Heatinggas / diesel / electric

Not sure which configuration fits your parts?

Send us your workpiece size, coating type and required output per shift. We reply with a line proposal and a budget range within one working day.

Request a quotationChat on WhatsApp

Where liquid painting lines are used

Wet painting is the right choice when the finish has to be smooth and glossy, when the part cannot take a 180–200 °C oven, or when the colour range has to change often. Typical products we quote for:

  • Automotive parts, wheels, mirrors and plastic-metal assemblies
  • Household appliances with high-gloss decorative panels
  • Metal furniture with wood-effect or soft-touch finishes
  • Machinery covers, generator sets and pump housings
  • Electrical cabinets where a smooth orange-peel-free coat is required
  • Parts needing primer + top coat + clear coat in one pass

Lines are built for solvent-based, water-based or UV-cured paint. The booth type, flash-off length and oven curve are matched to the paint supplier’s technical data sheet, so the finish meets the gloss and adhesion targets you specified.

What we need to design your painting line

  1. Paint system and data sheet — solvent, water-based or UV; viscosity, flash point and recommended flash-off time.
  2. Coats required — primer, top coat, clear coat; number of passes through the booth and oven.
  3. Part size and hanger load — sets conveyor pitch, booth opening and oven tunnel section.
  4. Output and takt time — pieces per hour, or conveyor speed in m/min.
  5. Finish target — gloss level, film thickness in µm, and any colour-change frequency.

With these five items we can propose a water curtain booth line for small batches, or a full automatic line with flash-off tunnel, drying oven and cooling zone for continuous production.

Frequently asked questions

Water curtain booth or dry filter booth — which one?

Water curtain booths handle high paint volume and keep the workshop cleaner; dry filter booths are simpler and cheaper to run for low volume or frequent colour change. Many customers take a water curtain booth for the main colour and a small dry booth for samples.

Can one line handle both primer and top coat?

Yes. A typical two-coat line is: loading → spray booth 1 (primer) → flash-off → spray booth 2 (top coat) → curing oven → cooling → unloading. The oven length is calculated from the total wet film, not from a fixed template.

How do you control solvent safety?

Explosion-proof motors and wiring are used in the booth and flash-off zones, with forced ventilation sized to the solvent load and an interlock that stops spraying if airflow drops. We supply the airflow calculation with the drawings so your local authority inspection can be passed.

What is the usual delivery time?

Manual water curtain booth lines ship in 30–45 days; automatic multi-booth lines in 50–70 days. Installation supervision and commissioning can be included on request.

BestCoatingLine

Powder coating lines, liquid painting lines and turnkey coating solutions. Engineered with specialist partner plants in Guangdong, China.

WhatsApp / WeChat: +86 156 0291 6761

[email protected]

Registered office

Sales departmentRoom D327, No. 42 Caiyun Road,
Longcheng Street, Longgang District,
Shenzhen, Guangdong, China

CompanyBEST MACHINES & EQUIPMENTS CO., LTD.

Production base

Project officeNo. 6-1, Dongsheng Road, Dongsheng Village,
Minzhong Town, Zhongshan,
Guangdong, China

Assembly base

Machining & assemblyChashan, Dongguan,
Guangdong, China

Working hoursMon-Sat, 08:30-18:00 (GMT+8)

© 2016-2026 BEST MACHINES & EQUIPMENTS CO., LTD. All rights reserved. Coating line solutions since 2016
Scroll to Top