PRODUCT
Economic Mono-Cyclone System Booth
A single-colour production booth with mono-cyclone recovery, giving high powder recovery rates at a lower cost than a full cartridge system.
For single-colour lines the mono-cyclone is the most economical way to recover powder: the cyclone separates overspray from the air stream and returns it to the hopper, so most of what misses the part is reused.
Recovery rates reach around 98 % with the right airflow, which is why this design is still the standard on high-volume single-colour lines. Final filtration handles the fine fraction that the cyclone cannot catch.
- Mono-cyclone with high recovery rate
- Recovered powder returns to the hopper
- Final filter stage for fine particles
- Best value for single-colour production
- Hopper, sieve and venturi feed included

| Item | Typical specification |
|---|---|
| Recovery | mono-cyclone, up to ~98 % |
| Use case | single colour, high volume |
| Guns | 2 – 8 |
| Feed | hopper + venturi + sieve |
Not sure which configuration fits your parts?
Send us your workpiece size, coating type and required output per shift. We reply with a line proposal and a budget range within one working day.
Compact recovery for small and medium lines
The mono-cyclone booth combines a cyclone and a filter set in one compact body, so it fits into a hall where a full cyclone plus ducting would not. It is the usual choice for single-booth lines and for plants that run one or two colours.
- Recovery of overspray back into the feed hopper
- Compact footprint, short duct run
- Filter stage keeps exhaust clean for workshop return
- Manual or automatic gun configuration
Booth width and height follow your part envelope, and the fan is sized so airflow stays above the minimum needed to contain the powder cloud at full conveyor speed.