Reciprocator

PRODUCT LINE

Automatic Gun Reciprocators

A reciprocator moves guns up and down in front of the part so film thickness stays even without an operator. It typically cuts powder consumption by 20-30 % at the same film thickness.

Get a quotation

Stroke and speed follow the part height: the stroke overshoots the part by 100-150 mm at both ends, and the speed completes one full cycle in roughly the time a part takes to pass the booth.

We supply single and double column versions with 1-8 gun mounts, pneumatic or servo drive, with stroke and speed set from the control panel. Guns can be angled for complex geometry.

Combined with a workpiece detecting system, the reciprocator sprays only when a part is in front of it – saving powder on gaps and keeping the booth walls clean.

Reciprocator

What is included

  • Stroke 600 – 2000 mm, adjustable
  • 1 – 8 gun mounts, single or double column
  • Pneumatic or servo drive
  • Stroke and speed set from the panel
  • Works with workpiece detection for on-demand spraying

Typical specifications

ItemTypical specification
Stroke600 – 2000 mm
Gun mounts1 – 8
Drivepneumatic or servo
Speedadjustable, matched to line speed

Not sure which configuration fits your parts?

Send us your workpiece size, coating type and required output per shift. We reply with a line proposal and a budget range within one working day.

Request a quotationChat on WhatsApp

Reciprocator or fixed guns — when each makes sense

Fixed guns are enough when the parts are short and the same height all day. A reciprocator becomes necessary as soon as part height varies, or when the film has to be even from top to bottom without an operator standing at the booth.

  • Stroke 600–1800 mm, adjustable speed and dwell
  • One or two gun mounts per unit
  • Pneumatic drive for simple lines, servo drive for recipe-based repeatability
  • Wall-mounted, frame-mounted, or rail-mounted on the conveyor

On long booths two reciprocators facing each other cover the part from both sides; on tall parts a third gun is often fixed at the top to cover the hanger area. The control box links to the line signal so the stroke stops when the conveyor stops.

Frequently asked questions

How many reciprocators does a booth need?

One per side for parts up to about 1.5 m high. Taller or wider parts use two per side, or one reciprocator plus fixed guns at the extremities.

Can we control it from the main PLC?

Yes. The unit accepts a start/stop signal and a speed reference from the line PLC, and recipe values can be stored with the booth recipe.

BestCoatingLine

Powder coating lines, liquid painting lines and turnkey coating solutions. Engineered with specialist partner plants in Guangdong, China.

WhatsApp / WeChat: +86 156 0291 6761

[email protected]

Registered office

Sales departmentRoom D327, No. 42 Caiyun Road,
Longcheng Street, Longgang District,
Shenzhen, Guangdong, China

CompanyBEST MACHINES & EQUIPMENTS CO., LTD.

Production base

Project officeNo. 6-1, Dongsheng Road, Dongsheng Village,
Minzhong Town, Zhongshan,
Guangdong, China

Assembly base

Machining & assemblyChashan, Dongguan,
Guangdong, China

Working hoursMon-Sat, 08:30-18:00 (GMT+8)

© 2016-2026 BEST MACHINES & EQUIPMENTS CO., LTD. All rights reserved. Coating line solutions since 2016
Scroll to Top