PRODUCT
Electrostatic Powder Enamelling Booth
A powder enamelling booth for thicker decorative and protective films, with electrostatic guns and matched recovery for enamel powders.
Enamel powders are heavier and more abrasive than standard coating powders, so the feed system, venturi and sieve are specified for that duty rather than reused from a standard booth.
The booth gives even film build on decorative parts – furniture frames, appliance panels, garden equipment – where a thicker, more uniform coat is the visible quality criterion.
- Feed system rated for enamel powders
- Even film build on decorative parts
- Matched recovery and sieve
- Electrostatic guns with adjustable kV

| Item | Typical specification |
|---|---|
| Application | enamel and decorative powders |
| Recovery | cyclone or cartridge |
| Guns | 2 – 8 |
Not sure which configuration fits your parts?
Send us your workpiece size, coating type and required output per shift. We reply with a line proposal and a budget range within one working day.
Electrostatic enamelling booth for porcelain-style finishes
Electrostatic powder enamelling gives a glass-like, chip-resistant finish that ordinary powder cannot match. The booth is built to handle the finer enamel powder and the higher film build these finishes need.
- Higher-voltage gun settings for enamel powders
- Recovery designed for fine, easily airborne powder
- Booth surfaces that are quick to clean between colours
- Matched curing curve for enamel cross-linking
Typical parts are sanitary ware fittings, cookware exteriors, architectural hardware and appliance trims. Because enamel film is usually thicker, oven dwell time is calculated for the higher film build, not for standard powder.