PRODUCT LINE
Powder Coating Booths and Recovery Systems
The booth decides how much powder you waste and how fast you can change colour. We supply cyclone, mono-cyclone, cartridge and quick colour-change booths, matched to your gun count, workpiece size and production rhythm.
Airflow is the whole game in a powder booth. Too little extraction gives orange peel and back-ionisation; too much pulls powder away from the part and sends it to the filters. We size the fan and ducting from the booth opening area and the number of guns, so downdraft at the part stays in the effective range.
Recovery options: a mono-cyclone handles single-colour production with high recovery rates, cartridge booths suit multi-colour work and fast cleaning, and stainless panels are available where washdown is required.
Included with every booth: powder hopper, venturi feed, sieve or rotary screen, and a fluidising bed so powder feeds evenly at low pressure.

What is included
- Cyclone, mono-cyclone or cartridge recovery
- Quick colour-change models with removable ducting
- SS304 panels for washdown duty
- Hopper, fluidising bed, venturi feed and sieve
- Explosion-relief panels and antistatic grounding
- Booth lighting and operator platform options
Typical specifications
| Item | Typical specification |
|---|---|
| Booth type | cyclone / mono-cyclone / cartridge / colour change |
| Panel material | powder-coated steel or SS304 |
| Recovery | up to 98 % with cyclone system |
| Accessories | hopper, sieve, fluidising bed, feed centre |
Models in this range

Magic Colour-Changing Powder Booth
A quick colour-change powder booth designed so the recovery system can be cleaned and switched to the next col…

Economic Mono-Cyclone System Booth
A single-colour production booth with mono-cyclone recovery, giving high powder recovery rates at a lower cost…

Electrostatic Powder Enamelling Booth
A powder enamelling booth for thicker decorative and protective films, with electrostatic guns and matched rec…

Powder Coating Gun
Electrostatic powder gun with separately adjustable kV and current, manual or automatic, GEMA-compatible or ma…

Powder Hopper, Sieve & Feeding System
Fluidising hopper, venturi pumps and sieve that keep powder delivery stable and free of lumps, hour after hour…

Workpiece Detecting System
Photoelectric part detection that fires each gun only when a workpiece is in front of it, cutting powder waste…

Power Supply & Feed Centre
The control cabinet that sets and monitors kV, current, powder flow and conveying air for every gun, with reci…
Not sure which configuration fits your parts?
Send us your workpiece size, coating type and required output per shift. We reply with a line proposal and a budget range within one working day.
Which booth matches your powder
All powder booths do the same job — contain the cloud, recover the overspray and keep the operator safe — but the recovery method decides running cost and how fast you can change colour:
- Cyclone recovery — high recovery rate, best for one or two colours on continuous production
- Mono-cyclone — compact and economical, suitable for small-to-medium lines
- Cartridge filter — fastest colour change, preferred for many short runs
- Colour-changing booth — separate recovery per colour, no cleaning between colours
Booth width, height and gun positions are sized from your largest part, and airflow is calculated so that powder does not escape at the openings when the conveyor is running at full speed.
Booth specification checklist
- Part envelope (L x W x H) and hanger height
- Number of colours per shift and change frequency
- Gun count and whether reciprocators are used
- Powder type and target film thickness
- Extraction duct route and available fan position
Frequently asked questions
How long does a colour change take?
On a cyclone booth a full colour change (blow-down, cleaning, new powder) takes 20–40 minutes with two operators. On a colour-changing booth it is a matter of switching the recovery module, typically 3–8 minutes.
Does the booth need a separate dust collector?
Cyclone and mono-cyclone booths use a secondary filter after the cyclone, so the exhaust is clean enough to return to the workshop. Cartridge booths combine both stages in one unit.
Can the booth be built to local fire-code requirements?
Yes. We supply explosion-proof wiring and motors, a grounded booth body and airflow interlocks, and we provide the airflow calculation so your local inspection can be passed.
Booth types we build
Magic colour-changing booth · Mono-cyclone booth · Electrostatic enamelling booth · Powder guns