Transformer radiator powder coating: a plant in Jiangsu
This Jiangsu radiator plant had the opposite problem to a greenfield project: they already coated radiators, and the rejects were all in the same two places – pinholes along welds, and thin film inside the fin stack. The project was a rebuild of pretreatment and the spray zone rather than a new building.



The parts
Welded transformer radiators, fin pitch roughly 8-15 mm, panels coated in black, grey and RAL colours for different transformer makers.
What the line had to solve
- Weld oil and drawing compound on incoming panels cause pinholes and adhesion loss; a three-stage wash was not removing them.
- Fin gaps act as a Faraday cage: powder reaches the outer fins and starves the inner ones.
- Radiator edges take more powder than flat faces, so film runs high at edges and low in the middle unless the gun path is adjusted.
- Rework on a coated radiator means stripping the whole part – rejects are expensive, so first-pass coverage matters.
How the line is built
- Pretreatment rebuilt to four stages with an alkaline degrease matched to the weld oil actually used, a rinse, a conversion coating, and a final demineralised rinse.
- Gun arrangement changed: carriages angled into the fin stack from both sides at a shorter distance, with an extra pass at low line speed for deep stacks.
- Voltage and current set per zone rather than one setting for the whole booth, so the fin interior gets penetration without overcharging the edges.
- A test panel from each batch is coated first and checked for film and adhesion before the batch runs.
Acceptance and handover
Acceptance focused on the two failure modes: no pinholes on a weld sample after a salt-spray check, and film inside the fin stack within 60-80 um at the middle fin, not just the outer one. Adhesion to ISO 2409 class 0-1, and a documented cure check per shift.
Customer name withheld. Reject-rate data before and after can be discussed under NDA.
Related
Powder coating line · Powder coating booth · Curing oven · Pretreatment · Watch a radiator line running