Coating line videos: lines running in production
Before signing, every buyer asks the same thing: does it actually run, and how fast. These clips were filmed inside plants where our lines are installed — powder lines, spray booths, liquid painting lines and a dip coating line. No stock footage, no CGI.
Tap any clip to play it here, or open our YouTube channel for the full library.
Powder coating lines and systems
Powder coating system — Full line running: loading, spray booth, curing oven, unload.
Powder coating line — Conveyor, booth and oven working as one continuous line.
Powder coating booth — Spraying inside a recovery booth, film building on the part.
Coating for ceiling panels — Long flat panels on an overhead conveyor, tight hanger pitch.
Radiator and heat exchanger production
Transformer radiator powder coating — Heavy welded assemblies coated and cured without sagging film.
Panel radiator powder coating — Thin panels, high hanger density, short cycle time.
Five transformer radiator projects are written up as case studies – mixed sizes, heavy weldments, weld oil, tall panels.
Liquid painting lines
Liquid painting line with reciprocator — Automatic gun strokes for even film on tall parts.
Steel pipe painting machine — 1–12 inch pipes painted in line, uniform coverage.
Pretreatment and dip coating
Automatic dipping coating line — Full dip sequence with hoist transfer between tanks.
What the videos do not show
Film thickness, adhesion and oven temperature are measured, not filmed. Those numbers belong in the acceptance test: ±10 µm film, cross-cut adhesion class 0–1, and ±5 °C oven uniformity. If you want the acceptance criteria written for your own project, the guide below sets them out clause by clause.
Turnkey line contract checklist · How to size a powder coating line