High Quality Reciprocator

PRODUCT

High Quality Reciprocator

A single or double column reciprocator with 1-8 gun mounts, giving even film thickness and 20-30 % lower powder consumption than manual spraying.

Request a quotation

Stroke and speed are set to the part height, with 100-150 mm overshoot at each end so edges get full coverage. Speed is matched so one full cycle takes about the same time as a part passing the booth.

Pneumatic or servo drive, single or double column, with guns that can be angled for complex geometry. Paired with a workpiece detecting system it sprays only when a part is present.

  • Stroke 600 – 2000 mm, adjustable
  • 1 – 8 gun mounts
  • Pneumatic or servo drive
  • Single or double column
  • Works with workpiece detection
ItemTypical specification
Stroke600 – 2000 mm
Gun mounts1 – 8
Drivepneumatic or servo
Speedadjustable

Not sure which configuration fits your parts?

Send us your workpiece size, coating type and required output per shift. We reply with a line proposal and a budget range within one working day.

Request a quotationChat on WhatsApp

What a reciprocator does on a powder line

A reciprocator carries one or two guns up and down in front of the parts, so the operator does not have to sweep the gun by hand. On a running line this keeps film thickness even along tall parts such as cabinet doors, profiles and panels, and it removes the biggest source of coating variation — the operator’s arm.

How it is specified

  • Stroke length matched to the tallest part, typically 600–1800 mm
  • Speed and dwell adjustable from the control panel
  • One or two gun mounts, with or without a gun angle adjustment
  • Stand-alone frame, or mounted on the booth wall or conveyor rail

Drive options are pneumatic or servo. Pneumatic units are simple and cost less; servo units give repeatable stroke timing and are preferred when several reciprocators must work in sequence with a fixed recipe.

Questions buyers ask

How many guns should be on one reciprocator?

For panels up to 1.2 m, one reciprocator with two guns usually covers the full height. For taller or wider parts we mount two reciprocators facing each other, or add a fixed gun at the top and bottom of the booth.

Can a reciprocator be added to an existing line?

Yes, if the booth has a suitable frame or wall. We need the booth drawing and the part height, and the unit ships with its own control box that connects to the existing line signal.

BestCoatingLine

Powder coating lines, liquid painting lines and turnkey coating solutions. Engineered with specialist partner plants in Guangdong, China.

WhatsApp / WeChat: +86 156 0291 6761

[email protected]

Registered office

Sales departmentRoom D327, No. 42 Caiyun Road,
Longcheng Street, Longgang District,
Shenzhen, Guangdong, China

CompanyBEST MACHINES & EQUIPMENTS CO., LTD.

Production base

Project officeNo. 6-1, Dongsheng Road, Dongsheng Village,
Minzhong Town, Zhongshan,
Guangdong, China

Assembly base

Machining & assemblyChashan, Dongguan,
Guangdong, China

Working hoursMon-Sat, 08:30-18:00 (GMT+8)

© 2016-2026 BEST MACHINES & EQUIPMENTS CO., LTD. All rights reserved. Coating line solutions since 2016
Scroll to Top