PRODUCT
Power Supply & Feed Centre
The control cabinet that sets and monitors kV, current, powder flow and conveying air for every gun, with recipe storage per product.
Automatic lines need one place where all gun settings live. This cabinet gives each gun its own channel for voltage, current, powder flow and air, set from a single panel and stored as a recipe for each product.
Safety interlocks prevent guns from firing unless booth extraction and the conveyor are running, which is a requirement in most insurance and safety audits.
- Individual kV / current / powder flow per gun
- Recipe storage per product
- Interlock with booth extraction and conveyor
- Up to 12 guns from one cabinet
- Quick-clean feed centre for colour changes

| Item | Typical specification |
|---|---|
| Guns per cabinet | 1 – 12 |
| Control | kV, current, powder flow, air |
| Interlock | booth fan and conveyor |
Not sure which configuration fits your parts?
Send us your workpiece size, coating type and required output per shift. We reply with a line proposal and a budget range within one working day.
Power supply and feed centre for the coating line
This is the cabinet that feeds high voltage to the guns, distributes control power to the line, and gives the operator one place to set and read the coating parameters.
- Gun HV supply with per-gun KV and µA setting
- Recipe storage for different parts and colours
- Line interlock with conveyor, booth fan and oven
- IP-rated enclosure matched to your workshop conditions
Voltage and frequency are built for your site (380/415/440 V, 50/60 Hz), and the panel is labelled in English with a wiring diagram supplied in the shipment documentation.