High Quality Powder Coating Line

PRODUCT

High Quality Powder Coating Line

A complete electrostatic powder coating line: multi-stage pretreatment, powder booth with recovery, curing oven, overhead conveyor and PLC control, engineered around your workpiece and output.

Request a quotation

This is our standard configuration for a new powder coating plant: a three- to five-stage pretreatment, a cyclone or mono-cyclone powder booth with reciprocators, a tunnel curing oven sized to the line speed, and an overhead chain conveyor running at 1-3 m/min.

Because every station is sized from the same four inputs – largest workpiece, coating type, output per shift and floor space – the line runs without bottlenecks. If you only need a booth and oven to start with, we can supply that and add pretreatment later; the drawing leaves room for it.

  • Pretreatment 3-5 stages, dipping or spraying type
  • Powder booth with cyclone recovery and reciprocators
  • Tunnel curing oven, 180-200 C, gas/diesel/electric
  • Overhead chain conveyor, 1-3 m/min (6 m/min max)
  • PLC control with recipe storage and alarms
  • Trial run and video report before shipment
ItemTypical specification
Outputtypically 20-80 hangers/hour
Workpiececustom, up to 1500 x 1000 x 800 mm
Line speed0.5 – 6 m/min
Curing180 – 200 C, 15 – 20 min
HeatingLPG / gas / diesel / electric
Warranty24 months

Not sure which configuration fits your parts?

Send us your workpiece size, coating type and required output per shift. We reply with a line proposal and a budget range within one working day.

Request a quotationChat on WhatsApp

Best fit for this line

This configuration is chosen by buyers who run one or two colours on medium-to-large parts and want a line that can be upgraded later without rebuilding it:

  • Metal furniture frames and shelving panels
  • Electrical cabinets and enclosures
  • Garden tools, fencing and gates
  • Pump and valve bodies

What makes it different from an entry-level line

The conveyor is heavy-duty with a larger hanger load, the booth uses a full cyclone recovery instead of a simple filter, and the oven has a longer curing zone — so line speed stays stable when parts get heavier or the film gets thicker. Gun count, booth width and oven length are still sized to your part, not taken from a fixed catalogue size.

Questions buyers ask about this line

What output can one line give?

It depends on part area and conveyor speed. As a guide, at 2 m/min with 400 mm pitch, a single booth handles roughly 300–500 m² of coated surface per shift. Send your part and target output and we will calculate the gun count and booth length.

How much floor space is needed?

A straight line for parts up to 1.5 m long typically needs 18–28 m of length and 4–6 m of width, including the loading and unloading zones. If your hall is shorter, we design an L-shaped or return-loop layout instead.

Can we add a second colour later?

Yes. We leave space for a second booth and a colour-change zone in the layout, so a second colour can be added with a new booth and ducting rather than a new line.

BestCoatingLine

Powder coating lines, liquid painting lines and turnkey coating solutions. Engineered with specialist partner plants in Guangdong, China.

WhatsApp / WeChat: +86 156 0291 6761

[email protected]

Registered office

Sales departmentRoom D327, No. 42 Caiyun Road,
Longcheng Street, Longgang District,
Shenzhen, Guangdong, China

CompanyBEST MACHINES & EQUIPMENTS CO., LTD.

Production base

Project officeNo. 6-1, Dongsheng Road, Dongsheng Village,
Minzhong Town, Zhongshan,
Guangdong, China

Assembly base

Machining & assemblyChashan, Dongguan,
Guangdong, China

Working hoursMon-Sat, 08:30-18:00 (GMT+8)

© 2016-2026 BEST MACHINES & EQUIPMENTS CO., LTD. All rights reserved. Coating line solutions since 2016
Scroll to Top